To Next PageTo Next PageWhy Philips Home Theater System cannot play back BD-video (BD-ROM Profile 2.0)?
If your Philips Home Theater System cannot play back BD-video (BD-ROM Profile 2.0), insert an SD card (1GB or more) which is formatted on this unit. Some discs with BD-Live™ function require memory when playing back the content. Do not remove the card during playback, and make sure the write-protect switch on the SD card is not enabled.
How to enable 5.1-channel audio on my Philips Home Theater System?
If you're not getting 5.1-channel audio from your Philips Home Theater System, first, confirm that the disc actually contains 5.1-channel audio. Then, set “Audio Output” to “Speakers” in the settings menu. Also, check that the surround mode is not set to “2.1ch Stereo”; if listening to a stereo source, press [SURROUND] and select “Dolby Pro Logic II Music” or “Dolby Pro Logic II Movie”.
What to do if there is no audio from the Philips HTS3306 Home Theater System speaker system?
If you're not getting any audio from your speaker system, first, try increasing the volume. If that doesn't work, go into the setup menu and set “Audio Output” to “Speakers”. Also, ensure that the audio isn't muted and that you've selected the correct active source for external audio input.
What to do if there is no video signal on the display device with Philips HTS3306 Home Theater System?
If you're not getting a video signal on your display device with the Philips Home Theater System, first, make sure the TV is turned on and set to the correct external input. If the issue persists, select the correct video resolution in the “HDMI Video” settings menu. As a last resort, press and hold the play button on the front panel for 5 seconds to revert to the default settings.
Why is there no high-definition video signal on the TV screen from Philips Home Theater System?
If there's no high-definition video signal on your TV screen when using your Philips Home Theater System, check if the disc contains high-definition video and if your TV supports high-definition video.
How to get audio from TV speakers via HDMI with Philips HTS3306 Home Theater System?
If you're not getting audio from the loudspeakers of your TV connected via an HDMI cable to your Philips Home Theater System, set “Audio Output” to “HDMI Normal” or “HDMI LPCM” in the setup menu. Also, make sure that the TV speakers are turned on and not muted in the TV menu.
Why does the Philips HTS3306 show an error message when I select 'Auto' in the 'Menu Language'?
This error message may appear when your TV's OSD language is not supported by this unit. Make sure that the unit is connected to the Philips brand EasyLink TV and the “EasyLink” is set to “On”.
Why Philips HTS3306 Home Theater System cannot connect to the network while my PC is connected to the network?
Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting at the same time.
What to do if Philips HTS3306 cannot use the BD-Live™ function?
If your Philips Home Theater System cannot use the BD-Live™ function or the download of data doesn't perform properly, insert an SD card with enough capacity (1GB or more). Check if the SD card is correctly inserted and that the write-protect switch on the SD card is not enabled.
What to do if Philips HTS3306 cannot find a JPEG file?
If your Philips Home Theater System cannot find a JPEG file, make sure that the selected group (folder) does not contain more than 9,999 files for Blu-ray Disc™ / DVD / SD card, and 999 files for CD. Also, ensure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Sound Specifications| total power (RMS) | 1000 W |
|---|---|
| center frequency range | 180-20000 Hz |
| satellite speaker frequency range | 180-20000 Hz |
Power| power supply voltage | 120V |
|---|---|
| power supply frequency | 60Hz |
Loudspeakers| satellite speaker drivers | 3" full range woofer |
|---|---|
| satellite speaker impedance | 4 ohm |
| subwoofer driver | 6.5" high efficiency woofer |
| subwoofer frequency range | 60-80000 Hz |
| subwoofer impedance | 4 ohm |
Weight and Dimensions| set dimensions (W x H x D) | 435 x 59 x 295.6 mm |
|---|---|
| packaging dimensions (W x H x D) | 624 x 362 x 394 mm |
| set weight (with stand) | 3.6 kg |
| weight including packaging | 12.50 kg |
