12 EN
• An MP3 or WMA le on a USB
storage device
1 Connect a USB storage device to
this product.
2 Press USB on the remote control.
3 Use the remote control to control
play.
Button
Action
Start, pause or resume play.
/ Skip to the previous or next
track.
USB During USB play, press
repeatedly to select a repeat or
shue mode, or turn o a play
mode.
Note
• This product supports WMA les which are
converted via Windows Media Player (WMA
les converted via other le format converters
may not work).
• This product may not be compatible with
certain types of USB storage device.
• If you use a USB extension cable, USB HUB, or
USB multi-reader, the USB storage device may
not be recognized.
• Digital camera PTP and MTP protocols are not
supported.
• Do not remove the USB storage device while it
is being read.
• DRM-protected music les (MP3, WMA) are
not supported.
• Support a USB port: 5V , 1A.
Auto standby
When playing media from a connected
device, the SoundBar automatically
switches to standby after 29 minutes
of button inactivity and no audio/video
play from a connected device.
Set display brightness
You can press DIM repeatedly to select
a dierent brightness level of the
display panel on this product.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1 In any source mode, on the remote
control press Volume -, BASS -, and
TREBLE - in sequence within three
seconds.
» When the factory settings
restore is complete, the product
automatically switches o and
restarts.
To Next Page
Loading...
