Philips HTL3120 - 6 Product Specifications

13EN
6 Product
specifications
Note
• Specicationsanddesignaresubjecttochangewithout
notice.
Amplier
• Total output power: 120W RMS (+/- 0.5
dB, 30% THD) / 96W RMS (+/- 0.5 dB,
10% THD)
• Frequency response: 20 Hz-20 kHz /
±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 750 mV
• AUDIO-IN: 400 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16, FAT32
• SupportsMP3andWMAleformats
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 8 kbps-320 kbps
• WMA: 32 kbps-192 kbps
• Version:
• WMA: V7, V8, V9
Bluetooth
• Bluetoothproles:A2DP,AVRCP
• Bluetooth version: 3.0 + EDR
Main unit
• Power supply: 110-240 V~, 50/60 Hz
• Power consumption: 25 W
• Standbypowerconsumption:≤0.5W
• Speaker impedance: 8 ohm
• Speaker drivers: 4 x 3" woofer
• Dimensions (WxHxD): 995 x 94 x 102.5
mm
• Weight: 3.5 kg
Remote control batteries
• 2 x AAA-R03-1.5 V