EasyManua.ls Logo

Philips HTL3140B - 8 Troubleshooting

Philips HTL3140B
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
EN
Note
This product supports WMA les which are converted
via Windows Media Player (WMA les converted via
other le format converters may not work).
Bluetooth
Bluetooth proles: A2DP, AVRCP
Bluetooth version: 3.0 + EDR
Main unit
Power supply:
Model (Philips branded AC power
adapter): DYS602-210309W; AS650-
210-AA309
Input: 100-240 V~, 50/60 Hz 1.5 A
Output: 21V
, 3.09A
Standby power consumption: ≤ 0.5 W
Speaker impedance
Woofer: 8 ohm
tweeter: 16 ohm
Speaker drivers: 2 x (90mm/3.5" x
34mm/1.3") woofer + 2 x 31mm/1.2"
tweeter
Dimensions (WxHxD): 843 x 52 x 60 mm
Weight: 1.4 kg
Subwoofer
Power supply: 220-240 V~, 50-60 Hz
Power consumption: 35 W
Standby power consumption: ≤ 0.5 W
Impedance: 3 ohm
Speaker drivers: 1 x 134 mm (5.25")
woofer
Dimensions (WxHxD):
226 x 251 x 306 mm
Weight: 4.14 kg
Remote control batteries
1 x AAA-R03-1.5 V
8 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on the SoundBar do not work.
Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.
Sound
No sound from SoundBar speakers.
Connect the audio cable from your
SoundBar to your TV or other devices.
However, you do not need a separate
audio connection when the SoundBar and
TV are connected through HDMI ARC
connection.
Reset your SoundBar to its factory settings.
On the remote control, select the correct
audio input.
Make sure that the SoundBar is not muted.
No sound from the wireless subwoofer.
Wirelessly connect the subwoofer to
the SoundBar (see 'Pair up with the
subwoofer' on page 6).
Distorted sound or echo.
If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
Audio and video are not synchronized.
Press AUDIO SYNC +/- to synchronize
the audio with the video.
HTL3140B_51_CCR_EN.indd 14 4/23/2015 4:24:16 PM

Other manuals for Philips HTL3140B

Related product manuals