Philips HTL5120 - Speaker specifications

14 EN
6 Product
specifications
Note
• Specications and design are subject to change without
notice.
Amplier
• FTC total output power: 42W
• Woofer L + Woofer R: 32W ( 1%
THD, 3ohm, 180Hz-6KHz )
• Tweeter L + Tweeter R: 10W ( 1%
THD, 12ohm, 7KHz-20KHz)
• RMS total output power:
• 120W RMS (+/- 0.5 dB, 30% THD)
• 96W RMS (+/- 0.5 dB, 10% THD)
• Frequency response: 20 Hz-20 kHz /
±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 800 mV
• Music iLink: 550 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Bluetooth
• Bluetooth proles: A2DP
• Bluetooth version: 2.1 + EDR
Main unit
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 40 W
• Standby power consumption: ≤ 0.5 W
• Speaker impedance:
• Woofer: 3 ohm
• tweeter: 12 ohm
• Speaker drivers: 2 x 102 mm (4") woofer
+ 2 x 25.4 mm (1") tweeter
• Dimensions (WxHxD):
1010 x 81 x 154 mm
• Weight: 3.9 kg
Wall mount
• Dimensions (WxHxD): 40 x 100 x 26.5
mm
• Weight: 0.1 kg/each
Remote control batteries
• 2 x AAA-R03-1.5 V