Philips HTL5120 - 2 Your Soundbar; Main Unit; Remote Control

5EN
2 Your SoundBar
Congratulations on your purchase, and
welcome to Philips! To fully benet from
the support that Philips offers, register your
SoundBar at www.philips.com/welcome.
Main unit
This section includes an overview of the main
unit.
a (Standby-On/Standby indicator)
• Switch the SoundBar on or to standby.
• When the SoundBar is in standby, the
standby indicator turns red.
b Volume indicator/Source indicators
When you change volume, volume
indicators light up to indicate the volume
level.
Source indicator lights up when a source
is selected.
• HDMI ARC: Lights up when you select
HDMI ARC as the input source.
• HDMI 1: Lights up when you select
HDMI IN 1 as the input source. Blinks
for ve seconds when you play Dolby
audio.
• HDMI 2: Lights up when you select
HDMI IN 2 as the input source. Blinks
for ve seconds when you play DTS
audio.
Bluetooth
• OPTICAL: Lights up when you switch
to optical input source.
• AUX/Bluetooth: Lights up when you
switch to analog input source. Blinks
when you switch to Bluetooth mode.
• COAXIAL: Lights up when you switch
to coaxial input source.
c Volume indicator/V. SURR indicator
• When you change volume, volume
indicators light up to indicate the
volume level.
• Lights up when you select Virtual
Surround sound.
d Volume indicator/MUSIC iLINK indicator
• When you change volume, volume
indicators light up to indicate the
volume level.
• Lights up when you select MUSIC
iLINK as the input source.
Remote control
This section includes an overview of the
remote control.