12
English
Remote Control (continued)
Using the remote control
A Push to open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C Close the cover.
D Point the remote control directly at the
remote sensor (iR) on the front panel.
E Select the source you wish to control by
pressing the AUX, RADIO or DISC
button on the remote control.
F Then select the desired function (for
example í, ë).
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Never mix batteries (old and new
or carbon and alkaline, etc).
– Batteries contain chemical
substances, they should be disposed
of properly.
1_hts3011_98_eng 3_final808.indd12 121_hts3011_98_eng 3_final808.indd12 12 2008-02-21 4:47:32 PM2008-02-21 4:47:32 PM
To Next Page
Loading...
