Philips HTS3560 - Video and Audio Settings; Changing Video and Audio Configurations

15
• [Blu-ray 3D video] : Selects the
3-dimensional video output when you
play a 3D video on your home theater.
The home theater must be connected
to a 3D TV through HDMI.
• [Picture Settings] : Selects a
predened color setting.
5 Press OK to conrm your choice.
Note
• The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
• For settings related to HDMI, the TV must be
connected through HDMI.
Change audio settings
1 Press (Home).
2 Select [Setup], then press OK.
3 Select [Audio], then press OK.
4 Select and adjust the following settings:
• [Night Mode] : Selects quiet or full
dynamic sound. Night mode decreases
the volume of loud sounds and
increases the volume of soft sounds
such as speech.
• [HDMI Audio] : Selects HDMI audio
format or disables HDMI audio output
for the TV.
• [Speaker Setup] : Sets the volume level
and distance of each speaker to obtain
the best possible surround sound
based on your room setup.
5 Press OK to conrm your choice.
Note
• For settings related to HDMI, the TV must be
connected through HDMI.
• Night mode is available for Dolby encoded
DVD and Blu-ray discs (for models support
Blu-ray playback).
6 Change settings
This section helps you to change the settings of
your home theater.
Caution
• Most of the settings are already congured
with the best value for the home theater.
Unless you have a specic reason to change a
setting, it is best to leave it at the default value.
Access the setup menu
1 Press (Home).
2 Select [Setup], then press OK.
» The setup menu appears.
3 Select a setup menu, then press OK.
See the following sections for information
about how to change the settings of your
home theater.
4 Press (Back) to return to the previous
menu, or press to exit.
Note
• You cannot change a setting that is grayed out.
Change video settings
1 Press (Home).
2 Select [Setup], then press OK.
3 Select [Video], then press OK.
4 Select and adjust the following settings:
• [TV Display] : Selects a picture display
format to t the TV screen.
• [HDMI Video] : Selects the HDMI
video resolution.
• [HDMI Deep Color] : Displays colors
with more shades and hues when
the video content is recorded in
Deep Color and the TV supports this
feature.
En glish
EN