Software Upgrading Procedure
1, Download the Software from Philips support
Website:
2, Copy the Software upgrade file into USB Device.
http://www.philips.com/support.
A, Connect to TV and Turn on Main Unit
C, Press the “OK” on the Remote Control.
D, Software Upgrading, TV Screen Display:
E, After 1 or 2 minute, the TV Screen Display will
power off automatically.
Just a moment, the TV Screen will reset and Display:
At that time, can unplug the USB Device.
Software Upgrade finish.
Main unit Screen Display:
Main unit Screen Display:
TV Screen Display:
B, When insert the USB Device with software
Meanwhile, the TV Screen Display:
10-1
USB and
To Next Page
Loading...
