Philips HTS5530 - Product Specifications

16
Speakers
• Total output power:
• Center: 200 W RMS (10% THD)
• Front/Rear: 100 W RMS (10% THD)
per channel
• System: full range satellite
• Speaker impedance: 4 ohm (center), 8 ohm
(Front/Rear)
• Speaker drivers: 2 x 3” full range
• Frequency response: 150 Hz-20 kHz
• Dimensions (WxHxD):
• Center: 280 x 96 x 92 (mm)
• Front/Rear: 100 x 280 x 115 (mm)
• Weight:
• Center: 1.4 kg
• Front/Rear: 1 kg/each
• Cable length:
• Center: 2 m
• Front: 3 m
• Rear: 10 m
Laser speci cation
• Type: Semiconductor laser GaAIAs (CD)
• Wave length: 645 - 665 nm (DVD), 770 -
800 nm (CD)
• Output power: 6 mW (DVD), 7 mW
(VCD/CD)
• Beam divergence: 60 degrees.
• Input sensitivity:
• AUX: 2 V
• MP3 LINK: 1 V
Video
• Signal system: PAL / NTSC
• HDMI output: 480i/576i, 480p/576p, 720p,
1080i, 1080p
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Sampling frequency:
• MP3: 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 112 kbps - 320 kbps
• WMA: 64 kbps - 192 kbps
Radio
• Tuning range: FM 87.5-108 MHz (50/100
kHz)
• Signal-to-noise ratio: FM 50 dB
• Frequency response: FM 180 Hz-10 kHz
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: UMS (USB Mass Storage
Class)
• File system: FAT16, FAT32
• Maximum memory support: < 160GB
Main Unit
• Power supply:
• Latin America/Asia Paci c: 110-
127V/220-240V; ~50-60Hz switchable
• Russia/China/India: 220-240V, ~50Hz
• Power consumption: 200 W
• Standby power consumption:  0.9 W
• Dimensions (WxHxD): 435 x 50 x 340 (mm)
• Weight: 3.56 kg
Subwoofer
• Total output power: 200 W RMS (10% THD)
• Impedance: 4 ohm
• Speaker drivers: 203 mm (8”) woofer
• Frequency response: 20 Hz-150 Hz
• Dimensions (WxHxD): 196 x 392 x 342.2
(mm)
• Weight: 6.3 kg
• Cable length: 3 m
EN