Philips HTS6600 - Product Specifications; Amplifier, Radio, and Disc Specifications; Main Unit, Speaker, and Subwoofer Specifications

53
English
Speci cations
AMPLIFIER
Frequency Response: 20 Hz – 20 kHz / –3 dB
Signal-to-Noise Ratio: > 65 dB (CCIR)
Input Sensitivity
- AUX 1&2 In: 1000 mV
- TV 1&2 In: 500 mV
- Digital In: 500 mV
- MP3 Line-In: 250 mV
* (1% THD 1kHz)
RADIO
Tuning Range: FM 87.5–108 MHz (50 kHz)
MW 531–1602 kHz (9 kHz)
26 dB Quieting
Sensitivity: FM 20 dBf, MW 4μV/m
Image Rejection Radio:FM 25 dB, MW 28 dB
IF Rejection Ratio: FM 60 dB, MW 45 dB
Signal-to-Noise Ratio: FM 60 dB, MW 40 dB
MW Suppression Ratio: FM 30 dB
Harmonic Distortion: FM Mono 3%
FM Stereo 3%
MW 5%
Frequency Response FM 180 Hz–10 kHz / ±6 dB
Stereo Separation FM 26 dB (1 kHz)
Stereo Threshold FM 23.5 dB
DISC
Laser Type Semiconductor
Disc Diametre 12cm / 8cm
Video Decoding MPEG-1 / MPEG-2 /
/ DivX 3/4/5/6, Ultra
Video DAC 12 Bits
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N 56 dB (minimum)
Component Video Output
(Y)1.0 Vp-p, 75Ω
(Pb) 0.7 Vp-p, 75Ω
(Pr) 0.7 Vp-p, 75Ω
Audio DAC 24 Bits / 192 kHz
Frequency Response 4 Hz–20 kHz (44.1 kHz)
4 Hz–22 kHz (48 kHz)
4 Hz–44 kHz (96 kHz)
PCM IEC 60958
Dolby Digital IEC 60958, IEC 61937
DTS IEC 60958, IEC 61937
MAIN UNIT
Dimensions: 370 x 76 x 242 (mm)
(w x h x d)
Weight: 3.5 kg
AMBISOUND SPEAKERS
System: Full range satellite closed-
box system
Impedance: 6 Ω/channel
4 Ω/centre channel
Speaker drivers: 3 x 2”/channel
4 x 2”/centre channel
Frequency response: 180 Hz – 20 kHz
Dimensions: 180 x 420.5 x 180 (mm)
(w x h x d)
Weight: 2.32 kg/each
SUBWOOFER
Power Supply Rating: 220–240 V; 50-60 Hz
Power Consumption: 120 W
Low Standby power: < 1 W
System: Bass Re ex System
Impedance: 4 Ω
Speaker drivers: 165 mm (6 ½”) woofer
Frequency response: 30 Hz – 180 Hz
Dimensions: 295 x 443 x 295 (mm)
(w x h x d)
Weight: 9.1 kg
Speci cations subject to change without prior
notice.