Philips HU4801 - Switch the Humidifier on and off

10
EN
Rell water
Water level can be observed through the
transparent water tank window.
1 Switch off the humidier and unplug it.
O
F
F
H
I
G
H
L
O
W
2 Remove the upper unit by holding it at
both sides.
3 You can observe the water level through
the transparent water tank window. Fill
the water tank with cold tap water until
the water reaches the maximum water
indication level.
MAX
Note
•
When lling water, do not exceed the maximum water
level, or water might leak from the drain hole and air inlets.
• Do not shake the water tank when moving it, or water
might leak from the drain hole and air inlets.
• Do not ll water through the air outlets on top of the
humidier.
4 Place the upper unit back onto the water tank.