Philips HU4901 - Refill the Water; Normal Refill

10
EN
3 Fill the water tank with cold tap water until
the water reaches the maximum water
indication level.
MAX
» The oat begins to oat.
4 Place the water tank back on the
humidier base.
5 Place the upper cover back at the
humidier.
Rell the water
There are three ways to rell water into the
water tank: Normal rell, rell without removing
the water tank and easy rell.
Normal rell
1 Remove upper cover by lifting it at both
sides.
2 Remove the water tank from the
humidier base by lifting it at both sides