Why does it take a long time to reach the target humidity level with my Philips HU5931?
In dry conditions, moisture from your Philips Humidifier will be absorbed by walls, furniture, and other items in the room. Ventilation of dry outside air will also increase the time it takes to reach the target humidity.
How to reset filter replacement on Philips Humidifier?
If your Philips Humidifier still indicates that you need to replace the filter after you already have, ensure you correctly reset the filter. Plug in the appliance, switch it on, and then touch and hold the reset button for 3 seconds.
What to do if my Philips Humidifier still indicates that I need to replace a filter after I already did?
You may not have correctly reset the filter replacement indicator on your Philips Humidifier. Plug in the appliance, switch it on, and then touch and hold the reset button for 3 seconds.
What to do if my Philips HU5931 still indicates that I need to replace a filter, but I already did?
If your Philips Humidifier still indicates that you need to replace a filter, even after replacement, plug in the appliance, switch it on, and then touch and hold the reset button for 3 seconds.
What to do if my Philips HU5931 Humidifier produces a strange smell?
The appliance may produce a plastic smell the first few times you use it; this is normal. If the appliance produces a burnt smell, contact your Philips dealer or an authorized Philips service center. An unpleasant smell may also occur if one of the filters is dirty; in this case, clean or replace the filter.
Is my Philips HU5931 working if I do not see water vapor coming out of the appliance?
When mist is very fine, it is invisible. The appliance has NanoCloud humidification technology, which produces healthy humid air from the outlet area without formation of water mist.
Why can't I see water vapor coming out of my Philips Humidifier?
When the mist produced by your Philips Humidifier is very fine, it can be invisible.
What to do if my Philips Humidifier still indicates filter replacement after I replaced it?
If your Philips Humidifier indicates that you need to replace a filter even after replacement, ensure the appliance is plugged in and switched on. Then, press and hold the reset button for 3 seconds to correctly reset the filter counter.
What to do if my Philips Humidifier still indicates that I need to replace the filter after I already did?
If your Philips Humidifier indicates that you need to replace a filter even after you've done so, ensure you correctly reset the filter indicator. Plug in the appliance, switch it on, and then touch and hold the reset button for 3 seconds.
How to clean white deposits on Philips HU5931 wick?
The white deposits on the NanoCloud rotary humidification wick of your Philips Humidifier consist of minerals from the water. Follow the cleaning instructions in the user manual.
General| Brand | Philips |
|---|---|
| Model | HU5931 |
| Category | Humidifier |
| Language | English |
To Next Page
