Why is my Philips Humidifier so loud?
If your Philips Humidifier is extra loud, ensure that all packaging material has been removed from the filters. Additionally, try changing the fan speed to a lower level.
What to do if my Philips HU5931 Humidifier doesn't work even though it is plugged in?
If your Philips Humidifier doesn't work despite being plugged in, the filter replacement light might be flashing because the NanoProtect filter needs replacing. Replace the filter and reset the filter lifetime counter. Alternatively, the water refill light may be flashing. Ensure the water tank is properly installed and contains enough water.
Why are there white deposits on the NanoCloud rotary humidification wick of my Philips Humidifier?
Scale on the NanoCloud rotary humidification wick affects the humidifying performance. Follow the cleaning instructions in the user manual.
How to clean white deposits on Philips HU5931 wick?
The white deposits on the NanoCloud rotary humidification wick of your Philips Humidifier consist of minerals from the water. Follow the cleaning instructions in the user manual.
Why is my Philips Humidifier not working?
If your Philips Humidifier is not working even when plugged in, ensure that you replace the filter and reset the filter lifetime counter, if the filter replacement light has been flashing, but you have not replaced the NanoProtect filter. Also, make sure the water tank is properly installed and has enough water if the water refill light is flashing.
What to do if my Philips HU5931 airflow is weak?
If the airflow from your Philips Humidifier is weaker than usual, the pre-filter might be dirty, so clean it. Also, ensure that you have removed all packaging material from the NanoProtect filter.
Why does my Philips HU5931 Humidifier smell?
The Philips Humidifier may produce a plastic smell the first few times you use it, which is normal. However, if the appliance produces a burnt smell, contact your Philips dealer or an authorized Philips service centre. Also, one of the filters may be dirty, so try cleaning or replacing the filter concerned.
I do not see water vapor coming out of my Philips HU5931 Humidifier. Is it working?
The Philips Humidifier uses NanoCloud humidification technology, which produces healthy humid air without visible mist. Therefore, not seeing water vapor is normal.
What to do if my Philips Humidifier doesn't work even though it is switched on?
If your Philips Humidifier doesn't work even when switched on, check if the child lock is activated.
What to do if my Philips HU5931 still indicates that I need to replace a filter, but I already did?
If your Philips Humidifier still indicates that you need to replace a filter, even after replacement, plug in the appliance, switch it on, and then touch and hold the reset button for 3 seconds.
General| Brand | Philips |
|---|---|
| Model | HU5931 |
| Category | Humidifier |
| Language | English |
To Next Page
