Clock and Alarm settings 29
7 Clock and Alarm
settings
This feature allows you to set the
date, time and alarm settings for your
phone. The default date and time is
01/01
and
00:00
respectively.
7.1 Set date and time
Press
M in idle mode, scroll
: to
CLOCK & ALARM
and
press
m
OK
, press
m
SELECT
to enter
SET
DATE/TIME
.
The last stored date is displayed.
Enter the current date (DD/MM)
and press
m
OK
.
The last stored time is displayed.
Enter the current time (HH:MM).
Press
2 to select
A
(am) or
7 to select
P
(pm) if the time
is in 12 hours format. Press
m
OK
to confirm.
• A validation tone is emitted.
Note
An error tone will be emitted if an
invalid digit is entered in the date/
time fields.
Hour: 00 to 12; Minute: 00 to 59
Date: 01 to 31; Month: 01 to 12
Warning
If your phone is connected to an ISDN
line through an adaptor, the date &
time may be updated after each call.
The availability of date & time update is
dependent on your network provider.
Please check the date & time settings
in your ISDN system or contact your
network provider.
7.2 Set date/time format
You can set your preferred date/time
format for your phone. The default
format is
DD/MM
and
24 HOURS
.
7.2.1 Set time format
Press
M in idle mode, scroll
: to
CLOCK & ALARM
and
press
m
OK
, scroll : to
SET
FORMAT
and press
m
SELECT
.
Press
m
OK
to enter
TIME
FORMAT
.
• The current setting is displayed.
Scroll
: to select time format
display (
12 HOURS
or
24 HOURS
)
and press
m
OK
to confirm.
• A validation tone is emitted and
the screen returns to previous
menu.
7.2.2 Set date format
Press
M in idle mode, scroll
: to
CLOCK & ALARM
and
press
m
OK
, scroll : to
SET
FORMAT
and press
m
SELECT
.
Scroll
: to enter
DATE
FORMAT
and press m
OK
.
• The current setting is displayed.
Scroll
: to select date format
display (
DD
/
MM
or
MM
/
DD
) and
press
m
OK
to confirm.
• A validation tone is emitted and
the screen returns to previous
menu.
1
2
3
!
1
2
3
1
2
3
ID555_IFU_GB.book Page 29 Friday, July 18, 2008 2:06 PM
To Next Page
Loading...