Modifying an Existing Settings Block 2 Configuring Profiles and Settings Blocks
15
Modifying an Existing Settings Block
To change settings in an existing settings block:
1 Select the settings block you want to change and select the Load pop-up key to activate it.
2 Make the changes to the individual measurements or monitor settings.
3 Select the Store pop-up key to overwrite the existing settings. Changes to a settings block affect all
Profiles in which this block is used.
Creating New Profiles
Follow these steps to create a new Profile ICU B based on the Profile ICU A and add it to the list of
Profiles stored in the monitor. As creating a Profile requires you to activate different settings, you should
not do this while monitoring a patient. Each new name you assign to Profiles or Settings Blocks must be
unique, otherwise you have two items with the same name and you will not be able to distinguish them.
1 Choose a Profile similar to the one you want to create from the list of Profiles available in the monitor.
To preview the combination of settings blocks contained in any Profile, in the Profiles menu,
select that Profile from the list. The Profiles menu (which is grayed-out) changes to indicate the
contents of the selected Profile. To view the settings blocks of the active Profile, select Current.
2 Select Load to activate this Profile.
3 Create a new Profile that references the same settings as the active Profile:
a. In the Profiles menu, select Profile.
b. Select the pop-up key New.
c. Use the on-screen keyboard to type a meaningful name for the new Profile, in this case ICU B. If
you do not name the Profile, the monitor will assign a default name. You can rename the Profile
later.
d. Select Enter.
e. Select Load to activate the new Profile.
4 Create new settings blocks for the new Profile.
a. In the Profiles menu, select Monitor Settings.
b. Select the pop-up key New.
Profiles
Profile : ICU A
Patient Category : Adult
Paced : No
Display : 6 Waves A
Measmnt. Settings : Measmt. A
Monitor Settings : Monitor A
Profiles
Profile : ICU B
Patient Category : Pedi
Paced : No
Display : 6 Waves B
Measmnt. Settings : Measmt. B
Monitor Settings : Monitor B
Existing Profile:
Profile to be created:
To Next Page
Loading...
Need help?
General
