Installation & User’s Manual SL STRIP 400 TW LED Luminaires
10 INSTALLATION AND SET UP
Sh wline
Simply attach hook, clamp, etc. to the SL STRIP 400 TW LED Luminaire mount assembly in the M10 hole.
Note: Mounting hooks, clamps, etc. are sold separately or by others. For available mounting accessories refer to "SL
STRIP 400 TW LED Luminaire Accessories" on page 3.
Figure 7: Mounting Luminaire - Hanging Applications
Hooks / Clamps
(sold separately)
Mount
SAFETY CABLE: Is sold separately and recommended
for all hanging installation and may be required by
national and local codes. Use safety cable anchor point
for this fixture.
Mounting hole
size is M10.
Note:
Mount
To Next Page
Loading...
