vi
About This Guide
Audience
The IntelliVue Smart-hopping 1.4 GHz Access Point Installation Guide is
written for trained service personnel who will install the IntelliVue Smart-
hopping 1.4 GHz Core Access Point as part of an overall IntelliVue Smart-
hopping deployment.
Document Organization
The information in this guide is organized and presented as follows:
• Chapter 1, Overview, describes the IntelliVue Smart-hopping 1.4 GHz
Core Access Point and how it is used to provide a bi-directional data
flow between the IntelliVue Information Center and IntelliVue Patient
Monitors.
• Chapter 2, Installing the IntelliVue Smart-hopping 1.4 GHz Access
Point, provides procedures to physically install the Philips IntelliVue
Smart-hopping 1.4 GHz Core Access Point and includes instructions
for mounting the Core AP and Remote Antennas to a wall, above a
ceiling tile, and below a ceiling tile.
• Chapter 3, Maintaining the IntelliVue Smart-hopping 1.4 GHz Core
Access Point, provides procedures to maintain and troubleshoot
operation of the Philips IntelliVue Smart-hopping 1.4 GHz Core Access
Point.
Notational Conventions
This guide uses the following notational conventions to convey
information:
Note
Notes call attention to important information.
Caution Cautionary statements call attention to a condition that could result in loss
of data or damage to equipment.
Warning
Warnings call attention to a condition that could result in physical injury.
To Next Page
Loading...