Philips Lumea Advanced BRI921/00 - Page 15

15
English
7 Try each setting on your skin and find your comfortable setting.
If the flash feels uncomfortable and you experience pain, lower the setting.
-
When the 'READY to flash' light is white, press the flash button on the handle
once, to treat one spot with setting ➀.
The device makes a soft popping sound. The flash gives you a warm
sensation.
• You will see a flash of light •
Note: You can toggle through the light intensity settings by pressing the
on/off button (see 'Selecting the light intensity').
-
Move to next area. Treat one spot with setting ➁
1
2
3
4
5
-
Move to next area. Treat one spot with setting ➂
-
Move to next area. Treat one spot with setting ➃
-
Move to next area. Treat one spot with setting ➄
24 hours
8 Wait 24 hours.
Note: Even though you found your comfortable setting during the skin test, it
may occur that skin reactions show within 24hours after usage.
9 Check your skin for any reactions (e.g. redness, irritation, rash).
If there are no skin reactions after 24hours, start the treatment with the
highest comfortable setting.
If the highest comfortable setting resulted in a skin reaction, choose a lower
setting that did not result in any skin reactions.
If you did not test a lower setting, repeat the skin test.