Philips Lumea Advanced BRI921/00 - Electromagnetic Compatibility - Compliance Information; Explanation of Symbols

26
English
Operating conditions Lumea complies with its specifications when operated in NORMAL USE under
the following environmental operating conditions:
- a temperature range of 5°C to 35°C;
- a relative humidity range of 15% to 90%RH, non-condensing, but not
requiring a water vapor partial pressure greater than 50hPa; and
- an atmospheric pressure range of 700hPa to 1060hPa
Emitted wavelengths 530 nm – 1400 nm
Pulse duration <1.5milliseconds
Repetition time 1–3.5 seconds depending on chosen setting
Optical exposure Body attachment: 2.5–5.0J/cm
2
Bikini attachment: 2.5–5.0J/cm
2
Facial attachment: 2.5–4.5J/cm
2
Adapter input 100–240 V 50/60 Hz 1.0 A
Adapter output 24.0V 1.5 A 36.0 W
Average active efficiency ≥87.4%
Efficiency at low load
(10%)
≥80.87%
No-load power
consumption
<0.1W
Adapter type number The reference number (S036Nz2400150) can be found on your device. The
letter ‘z’ denotes type of plug, it can be: A, B, C, D, K, S, T, U, or V.
Electromagnetic compatibility - Compliance
information
This device complies with all applicable standards and regulations regarding
exposure to electromagnetic fields.
Explanation of symbols
The warning signs and symbols are essential to ensure that you use this product
safely and correctly and to protect you and others from injury. Below you find
the meaning of the warning signs and symbols on the label and in the user
manual.
This symbol identifies the manufacturer of the product: Philips Consumer Lifestyle B.V.,
Tussendiepen 4, 9206 AD Drachten, The Netherlands.
This symbol means that you have to read the user manual carefully before you use the device.
Save the user manual for future reference.