Philips Lumea Advanced BRI921/00 - Two Treatment Modes: Stamp & Flash and Slide & Flash

20
English
developing skin reactions. The ‘READY to flash’ light will blink orange to
indicate if the skin tone is too dark.
4 After moving to another body area or sun exposure or tanning (see 'Using
your Lumea before and after sun exposure or tanning'), perform a skin test to
determine a comfortable light intensity setting. To re-activate the setting
indication feature, turn on the device.
Note: Perform a skin test before you start to treat another body area or after a
skin tone change. Determine the light intensity setting for each body area
separately.
Two treatment modes: Stamp & Flash and Slide &
Flash
YourPhilips Lumea has two treatment modes for more convenient use on
different body areas:
-
The Stamp & Flash mode is ideal to treat small orcurvy areas like knees and
underarms. Simply press and releasethe flash button to release a single flash.
-
The Slide & Flash mode offers convenient use on larger areas like legs. Keep
the flash button pressed while you slide the device over your skinto release
several flashes in a row.