17
English
7 Continue until you have treated the full area. There are two treatment modes
(see 'Two treatment modes: Stamp & Flash and Slide & Flash').
8 Turn off the device when you finished the treatment.
9 Remove hair before every next treatment, as long as hair is still visible.
D Clean & store after treatment
1 Unplug the device from the power outlet.
2 Let the device cool down.
3 Moisten the soft cloth supplied with a few drops of water.
4 Take the attachment off the device.
5 Clean the light exit window of the device (A).
To Next Page
Loading...
