Philips Lumea SC2009 - Skin Type and Intensity Settings; Handling the Device During Use

2 To adjust the light intensity setting, press the intensity increase button
or the intensity decrease button until you have reached the required
setting.
3 Lumea should never be painful. If you experience discomfort,
reduce the light intensity setting.
4 After recent tanning, perform a skin test to determine the right light
intensity setting.
Skin type Skin tone Light intensity setting
I White; You always sunburn, never tan. 4/5
II Beige; You easily sunburn,
tan minimally.
4/5
III Light brown; You sunburn easily,
tan slowly to light brown.
4/5
IV Mid brown; You rarely sunburn,
tan easily.
3/4
V Dark brown; You rarely sunburn,
tan very easily.
1/2/3
VI Brownish black or darker; You rarely or
never sunburn, very dark tanning.
You cannot use the device
Note: To check if your skin type allows usage of the device, consult the skin
tone table with number 2 on the foldout page.
Note: Your skin may react dierently on dierent days/occasions for a
number of reasons.
Handling the device
1 Before use, charge the device, clean the attachments and the light exit
window and select the right light intensity for your skin tone.
2 Place the device at a 90° angle on the skin so that the attachment and
the safety ring are in contact with your skin.The safety ring prevents
unintentional ashing without skin contact.
5
3
4
2
1
18
English