English
DVD Setup Menu Options
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.
Audio Setup Menu
1
In disc mode, press SETUP.
2 Press 1 2 to select ‘Audio Setup’ icon.
3 Press OK to confirm.
Setting the analogue output
Set Analogue Output to match your DVD
home theatre system’s playback capability.
This function can also be accessed via the
SURR. button on the remote.
1 In ‘AUDIO SETUP PAGE’, press 34 to
highlight {ANALOG OUTPUT}, then
press 2.
STEREO
Select this to change channel output to
stereo which delivers sound from only
the two front speakers and subwoofer.
MULTI-CHANNEL
Select this to enable Multi-channel
output.
2 Press 34 to select a setting and press
OK to confirm.
Speaker Setup
This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound. For details, see
page 17.
Night Mode - turning on/off
When the night mode is activated, the
high volume outputs are softened and
low volume outputs are brought upward
to an audible level (DVD only). It is useful
for watching your favourite action movie
without disturbing others at night.
1 In ‘AUDIO SETUP PAGE’, press 34 to
highlight {NIGHT MODE}, then press 2.
ON
Select this to level out the volume. This
feature is only available for movies with
Dolby Digital mode.
OFF
Select this when you want to enjoy the
surround sound with its full dynamic
range.
2 Press 34 to select a setting and press
OK to confirm.
001-039-LX39-93-EngFinal 08/04/2004, 01:48 PM27
To Next Page
Loading...
