To Next PageTo Next Page
Need help?Do you have a question about the Philips LX3600D and is the answer not in the manual?
Picture/Display| aspect ratio | 4:3, 16:9 |
|---|
Sound| D/A converter | 24 bit, 96 kHz |
|---|---|
| frequency response | 30-20000 Hz |
| output power (RMS) | 6 x 50 W |
Loudspeakers| satellite speaker freq range | 120-20000 Hz |
|---|---|
| satellite speaker impedance | 4 ohm |
| subwoofer freq range | 30-120 Hz |
Video Playback| number of discs | 1 |
|---|---|
| video disc playback system | NTSC, PAL |
| video enhancement | Progressive Scan |
Audio Playback| compression format | Dolby Digital, DTS, MP3, PCM |
|---|---|
| MP3 bit rates | 32-256 kbps and VBR |
| playback media | CD, CD-R, CD-RW, MP3-CD |
Tuner/Reception/Transmission| auto digital tuning | Yes |
|---|---|
| number of preset channels | 20 |
| tuner bands | FM Stereo, MW |
Power| power supply | 110-240V, 50/60 Hz |
|---|---|
| standby power consumption | < 2 W |
| total sound power (RMS) | 300 W |
Dimensions| center speaker dimensions (W x H x D) | 234 x 96 x 70 mm |
|---|---|
| set dimensions (W x H x D) | 360 x 54 x 316 mm |
| subwoofer dimensions (W x H x D) | 220 x 230 x 360 mm |
Details variations in features and boards across different model versions.
Details technical specifications for various functions like Video Decoding, Tuning, Amplifier, etc.
Describes measurement configurations for FM and AM tuners.
Details setup for CD and Recorder audio measurements.
Lists essential service tools and compact discs for testing.
Provides guidelines for safely dismounting and mounting chip components.
General warnings about electrostatic discharge and protection equipment.
Caution regarding invisible laser radiation when the unit is open.
Requirements for leakage current testing after repair.
Detailed steps to remove the front panel assembly.
Instructions for removing tuner, loader mechanism, and mono AV board.
Steps to remove PSU, speaker connector, and amplifier boards.
Instructions on how to initiate the service test mode.
Details available tests like EEPROM Format, Rotary Encoder, and exiting the program.
Steps to modify the tuner grid setting for specific models.
Guide to restore factory settings and region code after repair.
Procedures for verifying and updating the set's software.
Details pin connections for the FTD display.
Circuit diagram and component layout for the front standby section.
Circuit diagram and visual layouts for the front display section.
List of electrical components for the front boards.
Details block diagrams, power, signal processing, and I/O circuits of the AV board.
Visual layouts of components and chips for the 3520pt3 PCB version.
Visual layouts of components and chips for the 3522pt1 PCB version.
Comprehensive list of electrical components for the AV board.
Explains Class-D operation, circuit diagrams, and clock generator.
Visual representation of the amplifier board's mechanical assembly.
Visual layouts (top and bottom views) of amplifier board parts.
List of electrical components for the amplifier board.
List of electrical components for the speaker connector board.
Schematic of the speaker connector board.
Visual layout of components and chips on the speaker connector board.
Exploded views of the main unit casing for different model versions.
Exploded view of the front cabinet assembly.
Exploded view of the bottom plate assembly.
List of parts for the main casing and accessories.
Lists for front cabinet and bottom plate assemblies.
List of screws used in the assembly.
Parts list for the loudspeaker package.
The first version of the service manual.
Details changes and additions made in version 1.1.
