Philips M8881W/10 - 14 Display Settings

29EN
14 Display settings
You can change the display of the phone during
standby mode.
Set the brightness
You can set the brightness of the handset
screen to different levels.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Brightness], then press [OK] to
conrm.
4 Select an option, then press [OK] to
conrm.
Set the backlight of the LCD screen
You can set the backlight of the LCD screen
and keypad ashing on or off when the phone
rings.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Display] > [Visual alert], then press
[OK] to conrm.
4 Select [Flashing on]/[Flashing off], then
press [OK] to conrm.
» The setting is saved.