Philips M8881WW/10 - Name the Handset; Set the Display Language

27EN
ECO
mode
ECO+
mode
Handset icon display
[Off] [Off]
and are off.
[Off] [On]
is displayed only after the
ECO+ mode is activated
during standby mode .
[On] [Off]
is displayed.
[On] [On]
is displayed and changed
to when the ECO+
mode is activated in
standby mode.
Name the handset
The name of the handset can be up to 16
characters.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Phone name], then press [OK] to
conrm.
4 Enter or edit the name. To erase a
character, select [Clear].
5 Press [Save] to conrm.
» The setting is saved.
Note
• You can see the handset name in standby mode only
after you have set it through this menu.
Set the display language
Note
• This feature only applies to models with multiple-
language support.
• Languages available vary from country to country.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Language], then press [OK] to
conrm.
4 Select a language, then press [OK] to
conrm.
» The setting is saved.