English
xxxxx
15
Tuning to preset radio stations
● Press PRESET G / H (3 / 4 on remote
control) until the desired preset station is
displayed.
Changing tuning grid (not available for
all versions)
In North and South America, the frequency step
between adjacent channels in the MW band is
10 kHz (9 kHz in some areas). The preset
frequency step in the factory is 10 kHz.
Changing the tuning grid will erase all
previously stored preset radio stations.
1 Select TUNER source or in the tuner mode.
2 Press PLAY MODE on the set for at least 5
seconds.
➜ The display will show "9 grd" or
"10 grd".
Notes:
–9 Grd and 10 Grd indicate that the tuning grid
is in step of 9 kHz and 10 kHz respectively.
– The FM tuning grid also will be changed from
50 kHz to 100 kHz or vice versa.
Radio Reception
pg001-021_MC145_55_Eng 21/12/05, 9:3415
To Next Page
Loading...
