English
xxxxx
19
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
● Press SLEEP on the remote control repeatly to
select desired time before
system shuts off.
➜ Display shows SLEEP and
series of time options for
selection: 60, 45, 30,15, 0,
60.
● To deactivate, press SLEEP on the remote
control once or more until ‘0’ is shown, or press
POWER / y on the system or remote control.
Clock/Timer
Specifications
AMPLIFIER
Output power .......................................... 2 x 2 W RMS
.......................................................................... 200W PMPO
Signal-to-noise ratio .......................... ≥ 62 dBA (IEC)
Frequency response ......... 63 – 16000 Hz, ± 3 dB
Impedance loudspeakers ......................................... 8 Ω
Impedance headphones ................. 32 Ω – 1000 Ω
CD PLAYER
Frequency range .................................. 63 – 16000 Hz
Signal-to-noise ratio ............................................ 65 dBA
TUNER
FM wave range ................................... 87.5 – 108 MHz
MW wave range ................................ 530 – 1700 kHz
TAPE DECK
Frequency response
Normal tape (type I) ...... 125 – 8000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) .................................... 34 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d)130 x 224.5 x 213 (mm)
GENERAL INFORMATION
AC Power ............................ 110 – 127 / 220 – 240 V
....................................................... 50/60 Hz Switchable
Dimensions (w x h x d) ........ 168 x 224.5 x 214.5
(mm)
Weight (with/without speakers) ..................................
............................................................ approx. 4.6 / 2.25 kg
Standby power consumption .......................... < 3 W
Subject to modification
pg001-021_MC145_55_Eng 21/12/05, 9:3519
To Next Page
Loading...
