Philips MCB240 - Saving Presets; Recalling a Preset

English
19
DAB Reception
DAB
............................... A primary service, followed by
secondary services
............................... A secondary service, preceded
by a primary service
........................ You can press TUNE 1 / 2 (or
S/T on the remote) to
scroll backward/forward the list.
If tuning to a selected station fails:
● the display shows or
..
➜ Retuning to alternative services/frequency
starts.
➜ A dot appears in the screen every 0.5 second.
➜ After successful tuning, the station name
appears and broadcasting text scrolls.
● If the retuning also fails, the display shows
or . You should
then either:
➜ Use Autoscan to refresh the list of available
stations (see Resetting).
➜ Press ENTER to go to a tuning indication
(see chapter Tuning/retuning, To improve
reception).
Saving presets
You can store up to 10 DAB radio stations in the
memory.
Manual programming
1 Select your desired station (See Selecting a
station).
➜ The name of current station is shown in the
1st display line. The broadcasting text, if available,
scrolls in the 2nd display line (DLS in default
setting).
2 Press PROGRAM (make sure you have
selected your desired station and the list of
stations has disappeared from the 2nd display
line).
➜ Display shows: current station name at the
top display line and the stations saved in
program locations at the bottom.
DAB
3 Press PRESET 3 / 4 (or ALBUM/PRESET
3 / 4 on the remote) once or more to find a
free location to store your new station.
4 Press PROGRAM.
➜ Display: Preset X saved when a station is
successfully saved (where X denotes a preset
station number).
DAB
DAB
Notes:
–You can erase a preset station by storing
another frequency in its place.
– If you have saved presets using Manual
programming, always select Fav station option when
using Station order sorting.
Recalling a preset
1 Press PRESET 3 / 4 (or ALBUM/PRESET
3 / 4 on the remote) once or more to find
your desired preset.
pg001-026_MCB240_22-Eng 2005.8.1, 13:3219