Philips MCD388 - Software Version Check & Upgrade; Upgrade Software; Software Check; CPU Version Check

2-1
Software Version Check & Upgrade
MCD388 Vxx
Upgrade software
Software check
3.Press SYSTEM on the remote controller to open menu, press Left or Right to select “Preference
Page”, TV screen shows as below:
Press Up or Down to select “Default” on remote controller, Press OK to exit reset.
Software upgrade finish.
Input password “811502” on remote controller, TV screen showing as below:
Upgrade File detected
--Preference Page--
TV type PAL
Audio CHI English
Subtitle CHI French
Disc menu CHI Spanish
Parental Chinese
Japanese
Default Korean
Russian
Tjai
Upgrade?
Press PLAY to start
Upgrading
CPU version check
1.Download the software from Philips support website
1.Keep press PLAY/PAUSE and STOP buttons,plug into the power cord at the same time,
TV showing as below:
2.Load the Software CD Disc or USB,when it is loading,
the TV screen showing as below:
Waiting half to one minute,till the TV screen showing disappear.
Turnoff electrical source and re-open.
http://www.philips.com/support
Ver :
Date
Time
Region code
MCD388 / xxxx
mm dd yyyy
hh : mm : ss
x