Philips MCD700/96 - Functional Overview; DVD Player and Amplifier Controls; Remote Control

10
English
Functional Overview
DVD player and power amplifier
1 STANDBY ON B
– switches the system on or to standby mode.
2 IR SENSOR
– point the remote control towards this sensor.
3 Control knob
4 / ¢
Disc ....................... press the control knob to the
left/right to skip to the previous/
next chapter/title/track.
Tuner .................... press the control knob to the
left/right to tune to a higher/
lower radio frequency.
................................. press and hold, then release the
key to start automatic search for
a radio frequency downward/
upward.
PROGRAM
DVD/VCD/CD press the control knob upward
to enter the program menu.
MP3/WMA-CD
................................. press the control knob upward
to add/delete a programmed
track to/from the program list.
Picture CD ........ during playback, press the
control knob upward to select a
slide show mode.
Tuner .................... press the control knob upward
to program preset radio stations.
REPEAT•STEREO
Disc ....................... press the control knob
downward to repeat a track or
disc.
FM .......................... press the control knob
downward to set stereo or
mono sound mode.
4 Display
– shows the current status of the DVD player.
5 SOURCE
– selects the respective sound source: DVD/
AUX1/AUX2/TUNER.
– switches the system on.
6 PRESET/ÉÅ
– Disc: starts or interrupts disc playback
– TUNER: selects a preset radio station
0
9
5 6 7 8
4
!
3
1
2
MCL
HI-RESOLUTION TFT DISPLAY
pg001-031_MCD700_55_Eng 2005.5.18, 1:44 PM10