Philips - MCD700 - Software and Parts Information; Software Version Check and Upgrading

5 - 1
A. MPEG SOFTWARE VERSION CHECK
1. Press SYSTEM button (on the remote control) to enter general setting page.
TV Screen shows
2. Press  button (on the remote control) to select Preference Page.
TV Setting
OSD Lang.
Screen Saver
C. MPEG SOFTWARE UPGRADING:
1. Download the firmware for Philips support website
http://www.philips.com/support
2. Prepare as uploading CD.
3. Load the CD in the CD Tray.
4. TV Screen shows
and upgrading will run automatically
Upgrade file detected
Upgrade?
Press PLAY to start
Upgrading
B. CPU VERSION CHECK
1. Keep PLAY and STOP buttons (on the set) while plug in the power cord.
TV Screen shows
MCD700 V1.0
TV set standard
Sound
Subtitle
Language chosen by disk
TV Screen shows
3. Press “811502” button (on the remote control).
3. Press oTbutton (on the remote control) to change region.
Press OK to confirm.
Ver MCD707/xx V1.1
Date mmm dd yyyy
Time hh : mm : ss
Region code 3
TV Screen shows
/xx : /versiom
SOFTWARE VERSION AND UPGRADING
5 - 1