English
17
Functional Overview
DVD player and power amplifier
1 ECO POWER/STANDBY-ON y
– switches on the system or puts it on to Eco
power/normal standby mode.
2 Display
– shows the current status of the DVD player.
3 ÉÅ
– starts or interrupts disc playback.
4 PRESET +/-
– in tuner mode, selects a preset radio station.
5 STOP 9
– stops disc playback or erases a program.
– in Demo mode (on the system only), activates/
deactivates the demonstration.
6 ¡/™
Disc:
– skips to the previous/next chapter/title/track.
Tuner:
– tunes to a higher/lower radio frequency.
– press and hold, then release the key to
start automatic search for a radio frequency
downward/upward.
7 OPEN•CLOSE ç
– opens or closes the disc tray.
8 n
– connect a headphone.
9 SOURCE
– selects the respective sound source: DVD/AUX/
TUNER (FM/MW).
– switches the system on.
0 IR SENSOR
– point the remote control towards this sensor.
! VOLUME -/+
– adjusts the volume upward/downward.
– adjusts the hours and minutes in clock/timer
setting mode.
– switches the set timer ON or OFF.
1 0 3 6
5
64 42
!
7
9 8
pg 001-024_MCD908_Eng-12 2007.6.12, 16:3317
To Next Page
Loading...
