Philips MCM2300 - Track and Program Management; Skipping Tracks and Files; Programming Playback Sequence

12 EN
Skip tracks
When playing a CD:
Press
/ to select tracks.
When playing an MP3 disc and USB:
1 Press / to select an album or a folder.
2 Press / WRVHOHFWDWUDFNRUDÀOH
Program tracks
This function allows you to program 20 tracks
in the desired sequence.
1 In stop mode, press PROG to activate the
program mode.
» [PROG] (program) and [01 PR 01] are
displayed.
2 For MP3 tracks, press / to select an
album.
3 Press / to select a track, and then
press PROGWRFRQÀUP
» [PROG] (program) and [01 PR 02] are
displayed.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
To erase the program
Press
twice.