10
English
Controls Installation
Placing MCM277
With the detachable stand and by-packed wall
mounting kit , MCM277 allows you to place it in
two ways: on desktops with stand or on
walls without stand.
Mounting stand onto the set
MCM277 is equipped with a stand. To mount
the stand onto the set,
1 Put MCM277 on a flat and firm surface, rear side
facing up
2 As shown, align the stand to the slots at set’s
bottom, 4 FRONT facing down
3 Push the stand down into the slots
➜ When the stand is in place, you will hear a
click
See Appendix: How to mount your
MCM277 onto walls to learn more about
wall mounting.
Mounting MCM277 onto walls
@ VOL +/-
– adjusts the volume level
– Clock/Timer: adjusts the hours and minutes
# 9
– CD/USB: stops playback; erase a program
$ OPEN/CLOSE
– opens/closes the CD door
% 3 / 4
– CD/USB: selects the next/previous album (for
MP3/WMA only)
– TUNER: selects a preset radio station
^ SLEEP
– set the sleep timer
& DBB (Dynamic Bass Boost)
– turns the bass enhancement on/off
* RDS/NEWS
– Tuner: selects RDS (Radio Data System)
information
– CD/USB/AUX: activates/deactivates news
P001-P029_MCM277_22_Eng 2007.12.27, 16:3210
To Next Page
Loading...
