12
English
CD/MP3-CD Operations
IMPORTANT!
The lens of the CD player should never be
touched.
Discs for playback
This system is able to play :
– All pre-recorded audio CDs
– All finalised audio CDR and audio
CDRW discs
– MP3-CDs (CD-ROMs with MP3 tracks)
● CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
Playing a disc
1 Select CD source.
2 Press OPEN•CLOSE3 on the top of the
system to open the CD compartment.
➜ “CD OPEN” is displayed.
3 Insert a disc with the printed side facing up and
press OPEN•CLOSE3 to close the CD door.
➜ “READING” is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks and album are shown.
4 Press ÉÅ to start playback.
To interrupt playback
● Press ÉÅ.
● To resume playback, press ÉÅ again.
To stop playback
● Press Ç.
Notes:
– Disc play will also stop when you select another
source or the disc has reached the end.
–For MP3 disc, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.
Te xt display
In CD mode
● Press DISPLAY/BAND repeatedly to see the
following information.
➜ Tr ack number and elapsed play time of
current track.
➜ Remaining play time of current track.
➜ Total number of tracks played and total
played-back time.
➜ Total remaining number of tracks and total
remaining play time.
In MP3-CD mode
● Press DISPLAY/BAND repeatedly to select
four display modes : Number, Track, Album and
ID3.
Number ➜ Album number, track number and
elapsed play time.
Track ➜ Track name scrolls and elapsed play
time.
Album ➜ Album name scrolls and elapsed play
time.
ID-3 ➜ ID-3 tag scrolls once and elapsed play
time.
Selecting a different track
● Press S or T (¡ or ™) repeatedly until
the desired track number appears in the display.
● If playback is stopped, pressÉÅ to start
playback.
DISPLAY/BAND
pg 001-021_M390_21-Eng 2/2/05, 14:2812
To Next Page
Loading...
