Philips NA220 - Before First Use; Preparing for Use

4 ENGLISH
- Always make sure that the food is fully cooked in the Airfryer.
- Be careful when pouring out the cooked food and be careful not to let the accessories fall out.
- This appliance is provided with a short power supply cord to reduce the risk of entanglement or
tripping which can occur with a longer power-supply cord.
- Extension cords may be used if care is exercised in the use. If an extension cord is used:
• The marked electrical rating of the cord must be as great as the rating of the appliance.
• The cord should be arranged so that it will not drape over the edge of the counter or table top
where it could be pulled by children or tripped over unintentionally.
• The extension cord should be a grounded type 3-wire cord.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to t into a polarized outlet only one way. If the plug does not t fully
in the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not attempt to
modify the plug in any way.
Electromagnetic elds (EMF)
This appliance complies with the applicable standards and regulations regarding exposure to
electromagnetic fields.
Disposal
Your product is designed and manufactured with high quality materials and components, which can be
recycled and reused. For recycling information, please contact your local waste management facilities
or visit www.recycle.philips.com.
Introduction
Congratulations on your purchase and welcome to Philips!
To fully benet from the support that Philips oers, register your product at
www.philips.com/welcome.
General description (Fig. 4)
1 Control panel
A Temperature button
B On/o button
C Keep warm button
D Light button
E Preset menus
F Decrease button
G Start/pause button
H Increase button
I Time button
2 Frying insert
3 MAX indication
4 Pan
5 See-through window
6 Power cord
7 Cord wrap
8 Air outlets
Before first use
1 Remove all packing material.
2 Remove any stickers or labels (if available) from the appliance.
3 Thoroughly clean the appliance before rst use, as indicated in the cleaning chapter.
Preparing for use
Place the appliance on a stable, horizontal, level and heat-resistant surface.
Note
• Do not put anything on top or on the sides of the appliance. This could disrupt the airow and
aect the frying result.
• Do not place the operating appliance near or underneath objects that could be damaged by steam,
such as walls and cupboard.