Philips NT5600/42 - 1. Turn the device on and insert the cutting element inside your nose. Do not insert the trimming head more than 5 mm into your nostrils.; 2. Slowly move the trimming head around inside each nostril. Make sure that the side with the trimming teeth touches the hair.; 3. Clean thoroughly after each use.; 1. Turn the device on and slowly move the trimming head along the rim of the ear to remove any hair that stick out. Make sure that the side with the trimming teeth touches the hair.

Trimming nose hair
1. Turn the device on and insert the cutting element inside your nose. Do not insert the trimming
head more than 5 mm into your nostrils.
2. Slowly move the trimming head around inside each nostril. Make sure that the side with the
trimming teeth touches the hair.
3. Clean thoroughly after each use.
Tr
imming ear hair
1. Turn the device on and slowly move the trimming head along the rim of the ear to remove any
hair that stick out. Make sure that the side with the trimming teeth touches the hair.
2. Carefully insert the trimming head into the outer ear channel. Do not insert the trimming head
more than 5 mm into your ear channel.
3. Turn the trimming head around to remove all unwanted hair from your outer ear channel.
4. Clean thoroughly after each use.