Additional Onis 200 handset
11
English
Using the telephone
Making a call
When you lift the HANDSET from the CHARGER, the icon should
be highlighted.
If this is not the case, please refer to the section entitled “Telephone
troubleshooting”.
Press .
Check for a tone and dial the number you wish to call.
To end the conversation, press again or replace the handset on its
charger.
Preparing the number before calling
(predial)
To check the number and, where necessary, correct before calling:
Enter the number on the keypad.
• If you make a mistake, you can delete the last character using |CORRECT
or by pressing .
Press or to make the call.
Answering a call
Your ONIS 200 rings, unless you have deactivated the ringer:
Press to talk.
• You can deactivate the handset ringer by pressing |SILENCE.
Press again to hang up, or replace the handset on the base station
or charger.
2
1
2
1
3
2
1
You can also obtain a line by pressing
the key.This activates the handset
loudspeaker.
The number will be displayed on screen.
The RECORD| function allows you to store
the number in one of the phonebooks.