Philips ORT7500 - Get started; Connect power; Set the clock

6 EN
• Press to enter or exit FM or DAB
menus.
i LCD screen
j AC MAIN~
• Connect to the AC power cord.
k AUDIO IN
• Connect to an external device by an
audio in cable.
l DAB SOFTWARE
• The socket for rmware upgrade
m
• USB socket,charge the device only
n Antenna
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Connect the AC power cord to the AC
MAIN~ socket and then to the wall outlet.
Turn on
Press the knob or turn the SOURCE knob.
» The product switches to the last
selected source.
• To switch the product to standby
mode, press the knob again.
Set the clock
1 In standby mode, press and hold the
knob for 2 seconds.
» (12-hour time format) or
(24-hour time format) blinks.
2 Turn the knob to select a time format,
and then press the knob to conrm.
» Hour digits blink.
3 Turn the knob to set the hour, and then
press the knob to conrm.