How to improve Philips Radio reception?
If your Philips Radio isn't getting a good signal, try these steps: * Keep the radio away from other electronic devices that might cause interference. * Fully extend and adjust the position of the radio antenna. * If you are using Wi-Fi, check the network connection and rotate or adjust the position of the Wi-Fi antenna.
Why do some Philips TAR8805 Radio stations not work sometimes?
Some stations can only support a limited number of listeners. If some stations do not work on your Philips Radio, try again after a few minutes. Also, the station may not be broadcasting at the moment, so try again later.
Why do some Philips TAR8805 Radio stations disappear from the list?
When a station stops broadcasting on the Internet, it will be removed from the list on your Philips Radio. The radio will check constantly if the station is on the air. If it restarts broadcasting, it will be brought back to the station list.
Why does my Philips TAR8805 Radio have no sound?
If your Philips Radio isn't producing any sound, here are a few things to try: * First, make sure the volume isn't set too low or muted. * If you're using the radio function, fully extend and adjust the position of the radio antenna. * Keep the radio away from other electronic devices to avoid interference. * For internet radio, check your Wi-Fi network connection and rotate/adjust the position of the Wi-Fi antenna. Also, verify the radio station is not buffering.
What to do if my Philips TAR8805 Radio is not responding?
If your Philips Radio isn't responding, try disconnecting and reconnecting the AC power plug, then turn the radio on again. Also, check to see if the radio is in standby mode; if it is, turn it on.
How to boost Wi-Fi signal on Philips TAR8805 Radio?
If your Philips Radio shows insufficient Wi-Fi signal strength, check the distance between your router and the radio. Also, rotate and adjust the position of the Wi-Fi antenna.
Why won't my Philips TAR8805 Radio connect to Wi-Fi?
If your Philips Radio cannot connect to your Wi-Fi network, check if your wireless router is switched on and supports WPS. If it does, use the correct setup method (PBC or PIN) to connect. You can also configure the Wi-Fi settings again.
General| Radio type | Internet |
|---|---|
| Tuner type | Digital |
| Auto digital tuning | Yes |
| Supported radio bands | DAB, DAB+, FM |
| Preset stations quantity | 70 |
| RMS rated power | 6 W |
| Speaker type | Full range |
| Number of built-in speakers | 2 |
| Display type | TFT |
| Coloration | Monochromatic |
| Projection | No |
| Product color | Black |
| Volume control | Rotary |
| Audible alarm type | Radio/Buzzer |
| Internet radio services supported | Spotify |
| Bluetooth range | 10 m |
| Bluetooth version | 4.2 |
| Power source | DC |
| AC input voltage | 100 - 240 V |
| DC input voltage | 9 V |
| AC input frequency | 50 - 60 Hz |
| USB charging voltage | 5 V |
| Package depth | 150 mm |
| Package width | 358 mm |
| Package height | 208 mm |
| Package weight | 1750 g |
| Harmonized System (HS) code | 85271900 |
Weight and Dimensions| Depth | 159.3 mm |
|---|---|
| Width | 268 mm |
| Height | 113.5 mm |
| Weight | 1310 g |
Provides essential safety instructions, warnings, and guidelines for the proper and secure use of the Internet radio.
Guidance on connecting the AC power adapter to the radio and wall socket safely.
Guides users through connecting the radio to a Wi-Fi network using WPS or manual settings.
Steps to select Internet radio mode and browse the station list for broadcasting.
Process for scanning and tuning into available DAB radio stations.
Steps to tune to FM radio stations manually or by seeking the strongest signal.
Accessing the main system settings menu and its sub-options.
Steps to configure Wi-Fi connection, network wizard, and view network information.
Procedure to set time, date, format, timezone, and daylight saving.
Procedure to reset the radio to factory default settings.
Detailed steps to set up one or two alarms with specific times, sources, and recurrence.
Steps to pair a Bluetooth device and play audio wirelessly through the radio.
Troubleshooting steps for when the radio has no power.
Solutions for problems related to no sound or poor sound quality.
Guidance for issues like no response, poor reception, Wi-Fi connection, and signal strength.
To Next Page
