Philips TAR8805 - Main Menu and Alarm Settings; Main Menu Navigation Guide; Setting Up Alarms

EN18
9 Use main menu
1
In working mode, press to access the top
menu.
2
Turn SELECT knob repeatedly to select
[Main menu].
3
Press SELECT knob to confirm.
4
Repeat steps 2 to 3 to select an option.
• [Internet radio]: select Internet radio
mode.
• [Podcasts]: select Podcasts radio mode.
• [Spotify]: select Spotify mode.
• [DAB]: select DAB mode.
• [FM]: select FM mode.
• [Bluetooth]: select Bluetooth mode.
• [Sleep]: set sleep timer
• [Alarms]: set alarm timer;
• [System settings]: adjust system
settings (see the chapter "Use system
settings menu").
Note
• If no button is pressed within 15 seconds, the
menu exits.
• You can also press SOURCE to select a mode:
Internet radio, Podcasts, Spotify, DAB radio,
FM radio or Bluetooth.
Set alarm
Note
• You can set two alarms to ring at dierent time.
• To make the alarm work normally, make sure
that the clock is set correctly.
1
Select [Main menu]>[Alarms].
If dock is not set, a message prompts
you to set clock.
2
Press OK to continue.
The day digit blinks.
3
Turn SELECT knob to set the day, then
press SELECT knob to confirm.
The month digit blinks.
4
Repeat step 3 to set the month, year, and
time respectively.
The [Alarm 1: o [00:00]] and [Alarm
2: o [00:00]] options are displayed.
5
Repeat step 3 to select [Alarm 1: o
[00:00]]>[Enable:][O].
6
Repeat step 3 to activate or deactivate the
alarm tinner.
• [O]: deactivate the alarm timer
• [Daily]: the alarm sounds everyday.
• [Once]: the alarm sounds only once.
• [Weekends]: the alarm sounds on
Saturdays and Sundays.
• [Weekdays]: the alarm sounds each
day from Monday to Friday.
7
Repeat step 3 to select [time], and then set
the alarm time.
8
Repeat step 3 to select [mode], and then
set the alarm source.
• [Buzzer]: select buzzer as alarm source
• [Internet radio]: select your last
listened Internet radio station as alarm
source.
• [DAB]: select your last listened DAB
radio station as alarm source.
• [FM]: select your last listened FM radio
station as alarm source.
9
Repeat step 3 to select [preset], and then
select your last listened station or a preset
radio station as your alarm source.
10
Repeat step 3 to select [Volume:], and then
set the alarm volume.
11
Repeat step 3 to select [Save].
Alarm 1 is set.
12
Repeat steps 5 to 11 to set Alarm 2.