1. Steam supply hose
2. Iron platform
3. First supply hose storage compartment
4. Mains cord with plug
5. ECO button with light
6. On/off button with light and MAX setting
7. `Water tank empty’ light
8. EASY DE-CALC light
9. EASY DE-CALC knob
10. Cord storage compartment
11. Second supply hose storage compartment
12. Detachable water tank
13. Carry lock
14. Carry lock release button
15. Soleplate
16. Steam trigger
17. `Iron ready’ light
18. Intelligent automatic steam button with light
19. Filling hole
Important
Read the separate important information leaflet and the user manual carefully before you use the appliance. Save
both documents for future reference.
Using your appliance
Optimal TEMP technology
The Optimal TEMP technology enables you to iron all types of ironable fabrics, in any order, without adjusting the
iron temperature setting. Fabrics with these symbols are ironable, for example, linen, cotton, polyester, silk, wool,
viscose, and rayon (Fig. 2).
Fabrics with this symbol are not ironable. These fabrics include synthetic fabrics such as Spandex or elastane,
Spandex-mixed fabrics, and polyolefins (e.g. polypropylene), but also prints on garments (Fig. 3). During ironing, you
can place the iron either on the iron platform or horizontally on the ironing board. Thanks to the Optimal TEMP
technology, the soleplate will not damage the ironing board cover (Fig. 4).
Ironing
Read this user manual, the important information leaflet, and the quick start guide carefully before you use the
appliance. Save them for future reference.
(1) Press and hold the steam trigger to start ironing (Fig. 5).
Never direct steam at people.
Note: For best results on tough fabrics such as cotton, linen and jeans, keep the steam trigger pressed continuously
when you move the iron over the fabric. Then move the iron over the same area a few more times without steam to
dry the fabric.
Note: For the best results on silk and shiny synthetic fabrics, it is recommended to keep the steam trigger pressed
continuously while ironing.
DynamiQ sensor and intelligent automatic steam mode
The intelligent DynamiQ sensor inside your iron knows exactly when and how your iron is moving. When you activate
the intelligent automatic steam mode, the DynamiQ sensor will start recognizing the movements of your iron and will
enable your iron to release the right amount of steam automatically without you having to press the steam trigger.
This will help you to get great results faster and easier.
To Next Page