Philips PET710 User Manual

14
English
Switching on for OSD language setup
English is the default language of your player’s on screen display.You may
choose to use English, French, Spanish, German, Simplified Chinese or
Traditional Chinese for your player’s on screen display.
Countries OSD Language Options
European English, French, Spanish, German
American English
Asia Pacific English,Tradtional Chinese, Simplified Chinese
1 Slide the POWER switch to ON to switch
on the player.
2 Press SET UP for the set up menu.
3 Select GENERAL SETUP and press OK.
4 Scroll and select OSD LANG and press 2
to select from OSD language options.
5 Select your preferred language and press OK.
Loading discs and switching on
1 Press OPEN to open the disc door.
2 Insert your chosen disc, label side up (also when a double sided
DVD disc is inserted). Make sure it is sitting properly in the correct recess.
3 Gently push to close the door.
4 Slide the POWER switch to ON to switch on the player.
➯ TIP
• A normal mechanical noise is heard during playback.
Basic functions
PET710_ENG.QXD 2/3/05 10:05 Page 14

Philips PET710 Specifications

Picture and Display

panel size	7 inch
effective viewing area	154.1 x 86.6 mm
display resolution	480 (w) x 234 (H) x 3 (RGB)
dot pitch	0.107 (w) x 0.370 (H) mm
brightness	400
contrast ratio	250:1
response time	30 ms

Sound

output power (earphone)	10 mW RMS
output power (built-in speakers)	250 mW RMS
signal to noise ratio (earphone)	80 dB
signal to noise ratio (built-in speaker)	>62 dB

Connectivity

headphone jack	3.5 mm x 2
line out (AV)	3.5 mm, Audio (L/R)/ Video (composite)
DC in	9 v

Power

power requirement	110-240 v, 50-60 hz
battery type	DC 7.4 V, Lithium-ion rechargeable Battery
power consumption	30 w

Battery

battery playing time	2.5 hours
battery charging time	3 hours
battery voltage	7.4 V

Dimensions and Weight

product dimensions (WxHxD)	7.5 x 1.2 x 6.1 inch
product weight	2 lbs
master carton dimensions (WxHxD)	18 x 11.4 x 7.1 inch