Philips PM2519 - 1.9. DIODE MEASUREMENTS; 1.10. CONTINUITY CHECK; 1.11. TEMPERATURE MEASUREMENTS

1.9.
1.10.
Response time
Protected up to
Maximum input voltage between
DIODE MEASUREMENTS
Driving current
Range
Protected up to
Maximum input voltage between
Resolution
Number of representation units
Relative reference setting
Polarity input terminals
CONTINUITY CHECK
(Buzzer range)
Range
Driving current
Short circuit
Isolation
Response time
TEMPERATURE MEASUREMENTS
Accessory required for temperature measurements ;
Range
Resolution
Accuracy
Relative reference setting
15
<2 including ranging
<1 excluding ranging in ranges 1kQ ... 1 MQ,
1.5 s for 10 MQ range
: 250 Vrms
: Hl and LO 250 Vrms
HI and earth 250 Vrms
LO and earth 250 Vrms
>1mA
: 1000 mV
: 250 Vrms
: Hl and LO 250 Vrms
HI and earth 250 Vrms
LO and earth 250 Vrms
2 100 pV
: 11000
: With push-button "zero set on/off”
: V/Q/mA negative, 0” positve
: In-diode range
: Diode/buzzer
:1mA
: Audible tone from 0... 102
: Resistance > 10 2, no tone
:<0,25 sec
Pt 100 probe
> —60 °C ... +200 °C
20.1 °C
750°C...
0 °C = + (3% of reading +0.5 °C)
0 °C... 100 °C = + (1% of reading +0.5 °C)
100 °C ... 200 °C = + (2% of reading +0.5 °C)
: With push-button “zero set on/off”