English
2 Press the release button on the shaving unit
and pull the shaving head holder o the shaving
unit.
3 Remove the shaving heads from the shaving
head holder. Discard the used shaving heads
immediately to avoid mixing them with the new
shaving heads.
4 After replacing the shaving heads, you can reset
the replacement reminder by pressing the on/
o button for 7 seconds. Wait until your hear
3 beeps. If you do not reset the replacement
reminder, the shaver resets automatically after
9 shaves.
Storage
Store the shaver in the pouch.
Note: Always let the shaver dry completely before
you store it in the pouch.
Ordering accessories
To buy accessories or spare parts, visit
www.philips.com/parts-and-accessories or go
to your Philips dealer. You can also contact the
Philips Consumer Care Center in your country
(see the international warranty leaet for contact
details).
4949
SP9871_EN_A6_cc2020_1021.indd 49SP9871_EN_A6_cc2020_1021.indd 49 2021/10/28 17:402021/10/28 17:40
To Next Page
Loading...
