Philips Q Line 65BDL3650Q - Signage Display

65BDL3650Q/75BDL3650Q/86BDL3650Q
44
6.4. Signage Display
Settings for signage display features.
6.4.1. General Settings
Signage Display Name
Default signage display name is “PD_{Ethernet_MAC_
Address}”. User can change the name with maximum 36
characters in length.
Boot Logo
Set up personal boot animation to show when system
powers on. This option is available only when OSD menu ->
Conguration -> Logo is set to "User".
System will search and list “bootanimation.zip” in the root
folder's external storage and bootanimation.zip that user
saved last time. When "Save" is selected, system will copy the
selected le to or overwrite bootanimation.zip le under /
data/local/bootanimation/folder.
Click “FORGET” to remove the bootanimation.zip already
stored in /data/local/bootanimation/ folder.
6.4.1.1. Server Settings
Settings -> Signage Display -> Server Settings
Email Notication
Settings -> Signage Display -> Server Settings -> Email
Notication
Click checkbox to enable/disable E-mail notication feature.
Set SMTP and manager E-mail after enabling the E-mail
notication feature.
SMTP
Setup sender E-mail address and SMTP server information.
There are two types of SMTP server for user to set up: “Gmail”
and “Other”. By using “Other” option, user can manually
setup STMP server, security type and server port.
Note:
1. The password should be in UTF8 format with 6 to 20
characters.
2. User cannot set port 5000 (SICP default port) and 2121
(FTP server default port).
SICP network port setting in “Settings -> Signage Display
-> Network Application -> SICP network port”.
FTP network port settings in “Settings -> Signage Display
-> Server settings -> FTP -> Port”.
Gmail: (SMTP server, Security type and Port are grayed out)
Other: