EasyManua.ls Logo

Philips QM14.3E LA User Manual

Philips QM14.3E LA
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Published by PvH/EL 1416 Quality Printed in the Netherlands Subject to modification EN 3122 785 19580
2014-Apr-17
2014
©
TP Vision Netherlands B.V.
All rights reserved. Specifications are subject to change without notice. Trademarks are the
property of Koninklijke Philips Electronics N.V. or their respective owners.
TP Vision Netherlands B.V. reserves the right to change products at any time without being obliged to adjust
earlier supplies accordingly.
PHILIPS and the PHILIPS’ Shield Emblem are used under license from Koninklijke Philips Electronics N.V.
Colour Television Chassis
QM14.3E
LA
Contents Page
1. Revision List 2
2. Technical Specs, Diversity, and Connections 2
3. Precautions, Notes, and Abbreviation List 5
4. Mechanical Instructions 9
5. Service Modes, Error Codes, and Fault Finding 13
6. Alignments 22
7. Circuit Descriptions 24
8. IC Data Sheets 30
9. Block Diagrams 35
10. Circuit Diagrams and PWB Layouts Drawing PWB
715RLPCB0000000213 SSB
40 90-91
715RLPCB0000000094 AmbiLight 92
715RLPCB0000000103 AmbiLight 94
11. Styling Sheets
7809 series 42" 96
7809 series 49" 97
7809 series 55" 98

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Philips QM14.3E LA and is the answer not in the manual?

Philips QM14.3E LA Specifications

General IconGeneral
BrandPhilips
ModelQM14.3E LA
CategoryTV
LanguageEnglish

Summary

Revision List

1. Revision List

Manual revision details and first release information.

Technical Specifications, Diversity, and Connections

2.1 Technical Specifications

Details on product specifications, online support, and software/drivers.

2.2 Directions for Use

Information on where to download user manuals and support documents.

2.3 Connections

Overview of rear, side, and bottom connectors with detailed pin assignments.

2.4 Chassis Overview

Overview of the TV chassis, referencing block diagrams for PWB locations.

Precautions, Notes, and Abbreviation List

3.1 Safety Instructions

Essential safety rules for repair, including isolation transformer and component replacement.

3.2 Warnings

Precautions regarding electrostatic discharge (ESD), high voltage, and tool usage during repair.

3.3 Notes

General notes on measuring voltages, waveforms, and schematic symbols.

3.3.3 Spare Parts

Information on consulting the Philips Spare Parts Web Portal for part overviews.

3.3.4 BGA (Ball Grid Array) ICs

Guidance on handling BGA devices and temperature profiles for soldering.

3.3.5 Lead-free Soldering

Rules and recommendations for using lead-free soldering tin and tools.

3.3.7 Board Level Repair (BLR) or Component Level Repair (CLR)

Decision criteria for board exchange versus component-level repair.

3.3.8 Practical Service Precautions

Advice on avoiding electrical shock and handling powered equipment safely.

3.4 Abbreviation List

List of technical abbreviations used throughout the manual.

Mechanical Instructions

4.1 Cable Dressing

Illustrations showing cable routing for 42", 49", and 55" series televisions.

4.2 Service Positions

Guidelines for placing the TV for servicing, emphasizing display protection and ESD safety.

4.3 Assy/Panel Removal

Step-by-step instructions for removing the rear cover and accessing internal components.

4.4 Set Re-assembly

Procedures for reassembling the TV after repair, including cable placement and EMC foam mounting.

Service Modes, Error Codes, and Fault Finding

5.1 Test Points

Discussion on measuring signals with oscilloscopes and using test patterns from ICs.

5.2 Service Modes

Overview of service modes (SAM, Factory, CSM) and their features for repair and diagnosis.

5.2.2 Service Alignment Mode (SAM)

Details on activating and using SAM mode for NVM modification, error clearing, and alignments.

5.2.3 Contents of the Factory mode

Purpose and specifications of the Factory mode for extended alignments and information display.

5.5 Software Upgrading

Instructions for upgrading TV software via USB, including preparation and download steps.

5.6 Error Codes

Explanation of error codes used to indicate failures and how they are stored in the error buffer.

5.7 The Blinking LED Procedure

Procedure for diagnosing errors by observing the blinking pattern of the front LED.

5.8 Fault Finding and Repair Tips

General tips and troubleshooting guidance for common TV issues.

Alignments

6.1 General Alignment Conditions

Conditions required for performing electrical adjustments, including power supply and warm-up time.

6.3 Software Alignments

Steps for performing software alignments, including white point and display adjustments via SAM mode.

6.4 Option Settings

Explanation of how the microprocessor communicates with I2C ICs using option codes.

6.5 Reset of Repaired SSB

Procedures for resetting NVM on a repaired SSB and setting service type and production code.

Circuit Descriptions

7.1 Introduction

Introduction to the QM14.3E LA chassis and its key features, including the MT5591.

7.2 MTK platform

Overview of the MTK platform architecture and its main components.

7.3 Power Supply

Description of the TV's power supply units and their architecture.

IC Data Sheets

8.1 Diagram, B, CXD2842

Block diagram and pin configuration for the CXD2842ER integrated circuit.

8.2 Diagram, B, MT5591

Internal block diagram of the MT5591 chipset, detailing its functional blocks and interfaces.

8.3 Diagram 10-1-29 B, AUDIO AMPLIFIER, B, STA381

Block diagram and pin configuration for the STA381 audio amplifier IC.

Block Diagrams

9.1 Wiring Diagram 7809 series 42"

Wiring diagram for the 42" 7809 series TV, illustrating component placement and connections.

9.2 Wiring Diagram 7809 series 49"

Wiring diagram for the 49" 7809 series TV, showing component layout and cable routing.

9.3 Wiring Diagram 7809 series 55"

Wiring diagram for the 55" 7809 series TV, detailing component arrangement and connections.

9.4 Block Diagram Architecture

Architectural overview of the MTK chipset, showing major functional blocks and their interconnections.

9.5 Block Diagram Connections

Detailed block diagram illustrating connections between various components and connectors on the main board.

Circuit Diagrams and PWB Layouts

10.1 715RLPCB0000000213 SSB

Circuit diagram for the SSB, focusing on the DDR3 interface with 16 bits.

10.1 715RLPCB0000000094 AmbiLight

Circuit diagram for the Ambilight 7-LED module (AL01), showing its connections and PWM outputs.

10.2 715RLPCB0000000094 Ambilight

Circuit diagram for the Ambilight 8-LED module (AL02), detailing its PWM outputs and LED driver connections.

10.3 715RLPCB0000000103 Ambilight

Circuit diagram for Ambilight 8-LED module (AL01), showing its connections and PWM outputs.

Styling Sheets

11.1 7809 series 42"

Exploded view and parts list for the 7809 series 42" TV styling and mechanical components.

11.2 7809 series 49"

Exploded view and parts list for the 7800 series 49" TV styling and mechanical components.

11.3 7809 series 55"

Exploded view and parts list for the 7800 series 55" TV styling and mechanical components.

Related product manuals